FLOCK automatic number plate recognition
page 3 / 11
A different font, popular for vanity plates (some countries do not allow such plates, eliminating the problem)
Circumvention techniques
Lack of coordination between countries or states. Two cars from different countries or states can have the same number but different design of the plate.
While some of these problems can be corrected within the software, it is primarily left to the hardware side of the system to work out solutions to these difficulties. Increasing the height of the camera may avoid problems with objects (such as other vehicles) obscuring the plate but introduces and increases other problems, such as adjusting for the increased skew of the plate.
On some cars, tow bars may obscure one or two characters of the license plate. Bikes on bike racks can also obscure the number plate, though in some countries and jurisdictions, such as Victoria, Australia, "bike plates" are supposed to be fitted. Some small-scale systems allow for some errors in the license plate. When used for giving specific vehicles access to a barricaded area, the decision may be made to have an acceptable error rate of one character. This is because the likelihood of an unauthorized car having such a similar license plate is seen as quite small. However, this level of inaccuracy would not be acceptable in most applications of an ANPR system.
=== Imaging hardware ===
At the front end of any ANPR system is the imaging hardware which captures the image of the license plates. The initial image capture forms a critically important part of the ANPR system which, in accordance to the garbage in, garbage out principle of computing, will often determine the overall performance.
License plate capture is typically performed by specialized cameras designed specifically for the task, although new software techniques are being implemented that support any IP-based surveillance camera and increase the utility of ANPR for perimeter security applications. Factors which pose difficulty for license plate imaging cameras include the speed of the vehicles being recorded, varying level of ambient light, headlight glare and harsh environmental conditions. Most dedicated license plate capture cameras will incorporate infrared illumination in order to solve the problems of lighting and plate reflectivity.
Many countries now use license plates that are retroreflective. This returns the light back to the source and thus improves the contrast of the image. In some countries, the characters on the plate are not reflective, giving a high level of contrast with the reflective background in any lighting conditions. A camera that makes use of active infrared imaging (with a normal colour filter over the lens and an infrared illuminator next to it) benefits greatly from this as the infrared waves are reflected back from the plate. This is only possible on dedicated ANPR cameras, however, and so cameras used for other purposes must rely more heavily on the software capabilities. Further, when a full-colour image is required as well as use of the ANPR-retrieved details, it is necessary to have one infrared-enabled camera and one normal (colour) camera working together.
To avoid blurring it is ideal to have the shutter speed of a dedicated camera set to 1⁄1000 of a second. It is also important that the camera use a global shutter, as opposed to rolling shutter, to assure that the taken images are distortion-free. Because the car is moving, slower shutter speeds could result in an image which is too blurred to read using the OCR software, especially if the camera is much higher up than the vehicle. In slow-moving traffic, or when the camera is at a lower level and the vehicle is at an angle approaching the camera, the shutter speed does not need to be so fast. Shutter speeds of 1⁄500 of a second can cope with traffic moving up to 65 km/h (40 mph) and 1⁄250 of a second up to 8 km/h (5 mph). License plate capture cameras can produce usable images from vehicles traveling at 190 km/h (120 mph).
To maximize the chances of effective license plate capture, installers should carefully consider the positioning of the camera relative to the target capture area. Exceeding threshold angles of incidence between camera lens and license plate will greatly reduce the probability of obtaining usable images due to distortion. Manufacturers have developed tools to help eliminate errors from the physical installation of license plate capture cameras.
== Usage ==
=== Law enforcement ===
==== Australia ====
Several State Police Forces, and the Department of Justice (Victoria) use both fixed and mobile ANPR systems. The New South Wales Police Force Highway Patrol were the first to trial and use a fixed ANPR camera system in Australia in 2005. In 2009 they began a roll-out of a mobile ANPR system (known officially as MANPR) with three infrared cameras fitted to its Highway Patrol fleet. The system identifies unregistered and stolen vehicles as well as disqualified or suspended drivers as well as other 'persons of interest' such as persons having outstanding warrants.